Nintendo 64 controller for PC / Switch Adapter

Mayflash Nintendo 64 controller for PC / USB / SWITCH

This N64 to USB adapter can be used to connect one or two Nintendo 64 controllers to the Nintendo Switch or a PC. If you use two adapters, you can connect up to 4 N64 controllers, just like on the original console.

Perfect for emulator games or if you happen to have Nintendo 64 as your favorite controller.

If you connect the adapter to a PC, you can choose between the two standards X-input and D-input depending on what the game / emulator has the best support for.

Support for Turbo, Autofire and Hold for all buttons.

The software in the adapter can be updated

How to set up Turbo / AutoFire / Hold

• To activate Turbo for a specific button - press and hold TURBO1 or TURBO2 depending on which of the connected N64 controls is configured. Then press the button on the hand control that will have the TURBO function.
• Repeat the above to activate AutoFire for the button instead
• Repeat the above once more to activate the HOLD for the button.
• Repeat the above a 4th time to make the button work normally again
• To clear ALL Turbo and Autofire settings for all buttons, quickly press TURBO1 or TURBO2 twice and the respective controller works normally again.

LEDs indicate the status of Turbo / AutoFire / Hold

• Player 1: TURBO1
• Player 2: TURBO2
• LED is constantly lit - means that one or more buttons have Turbo, AutoFire or Hold set.
• LED flashes quickly - means that a button with Turbo / AutoFire / Hold is currently in use.
• LED is off - No buttons have been configured for Turbo, Autofire or Hold.

Switch the left joystick with the D-pad

• To switch the function from the D-pad to the left joystick, press and hold both the START and A buttons for three seconds.
• To switch back to D-pad, press and hold both START and B buttons for three seconds.
• Both players will have the same attitude

Note: The home button only works for player 1.